Tamko Gutter Replacement Nationwide

Tamko Gutter Replacement: The Fort Worth Owner’s Guide

If you’re dealing with a failed or failing Tamko gutter system in Fort Worth, here’s the straight answer: we stock Tamko-compatible gutter replacement parts on our trucks, and a full gutter replacement in Fort Worth typically runs $8 to $14 per linear foot installed, which puts most single-story homes between $1,200 and $2,400 total. Most replacements are done in a single day. Most Fort Worth homeowners figure out their Tamko gutters are failing the morning after a hard rain, when they see water pouring over the front edge instead of moving toward the downspout, or they find a section pulling loose from the fascia board.

Call (682) 900-7902

We’re an independent Fort Worth roofing and gutter contractor, not affiliated with Tamko as a manufacturer, but we work with their gutter products regularly and know exactly how they behave in North Texas weather.

Which Tamko Models This Applies To

Tamko’s gutter product lines fall into a few main families: their standard K-style aluminum gutters (5-inch and 6-inch profiles), half-round gutters in 5- and 6-inch sizes, and their commercial box gutter systems. The 5-inch K-style is what we see on the overwhelming majority of Fort Worth homes built after 1990. If you’re not sure what you have, check the downspout width. A 2×3-inch downspout usually pairs with 5-inch K-style gutters. A 3×4-inch downspout signals 6-inch gutters, which are becoming more common on Fort Worth homes with steep roof pitches or Texas-sized roof valleys that dump a lot of water in one spot.

One compatibility gotcha worth knowing: Tamko 5-inch gutter hangers and hidden brackets do not always seat correctly on some aftermarket 5-inch troughs. The lip profile is slightly different. That’s why we always match Tamko gutter sections to Tamko hangers when we’re doing a partial replacement rather than a full run. For full replacements, we offer Tamko OEM parts or equivalent gauge aluminum from GAF, Owens Corning, and CertainTeed lines if you want a price comparison. The key spec that matters in Fort Worth is aluminum thickness. Tamko’s standard residential gutter is .027 gauge. Their heavier-profile option is .032. In a hail-heavy area like Fort Worth, we push .032 on any home that’s already taken hail damage in the past five years. It costs a little more up front and takes denting far better.

Signs Your Tamko Gutter Replacement Is Failing

• Water spilling over the front edge during normal rain. This usually means the gutter pitch has shifted or the hangers have pulled loose from the fascia. A gutter that doesn’t slope toward the downspout is a gutter that’s not doing its job. In Fort Worth, we see hanger pull-out frequently on fascia boards that have been softened by repeated freeze-thaw cycles and the occasional ice storm.
• Visible seams pulling apart or leaking at the corners. Tamko gutter systems are sectional in most residential installs, meaning they’re joined at seams every 10 to 20 feet. The sealant at those seams breaks down after seven to ten years in direct Texas sun, and once a seam starts leaking, it’s only getting worse.
• Rust at the seams or along the bottom channel. Aluminum doesn’t rust, but the steel screws and brackets in some older Tamko installs do. If you’re seeing orange streaks running down the outside face, the fasteners are failing and the gutter is slowly pulling away from the house.
• Sagging or visible gaps between the gutter and the fascia. This is almost always a hanger problem, not a gutter problem. In Fort Worth, the clay-heavy soil shifts with moisture, and over time, that subtle movement can work hangers loose even on a properly installed run. When the gutter pulls away from the fascia board, water runs behind the gutter and rots the wood, which is a much bigger repair bill than a gutter swap.
• Downspouts blocked with material that won’t clear, or downspouts that have separated at the elbow joints. A blocked downspout holds water up in the gutter run, which adds weight and strain on every hanger. If you’ve got trees close to the roofline in Fort Worth neighborhoods like the Near Southside or over toward TCU, leaf and seed-pod accumulation is a year-round problem. Trapped water plus Texas heat usually means gutter seams and downspout joints give out sooner than they should.

Replacement Cost & What’s Included

In Fort Worth, a full Tamko gutter replacement runs $8 to $14 per linear foot installed. That includes removal and disposal of the old gutters, new Tamko or equivalent-gauge troughs and downspouts, new hangers spaced no more than 24 inches apart, and a final alignment check so the water actually moves. For a single-story 1,600 to 2,000 square foot home with typical rooflines, you’re looking at $1,200 to $2,300 total. Two-story homes with steeper pitches run higher because of fall-protection equipment and extra labor time.

What drives the range: aluminum gauge (.027 vs .032), gutter width (5 vs 6 inch), the condition of your fascia boards (if they’re rotted, they need replacement before new gutters go on), and how much downspout reconfiguration the job needs. You get the exact number in writing before any work starts, per the Garrison Standard. One price, on paper, and it doesn’t move at the door. Every Tamko gutter replacement we install is covered by the 365-Day Done Right Promise: in writing, for one full year, and we come back for free at no charge if the repair fails within that guarantee period.

DIY or Call Us?

Here’s the honest split. Checking your Tamko gutters is safe and worth doing after any storm that brings high wind or hail. Walk the perimeter and look for sagging sections, visible gaps at the seams, and downspouts that have pulled loose. That’s information you can gather without getting on a ladder.

Replacing gutters is different. Any time you’re working at roof height with long sections of metal, the risk of a fall is real, and the risk to the fascia board from an improperly secured run is just as real. What starts as a $1,500 gutter replacement can become a $6,000 fascia and soffit repair if the gutters are hung wrong and water gets behind the run for a year. Travis Oakley has walked thousands of Fort Worth roofs the old-fashioned way, checking decking and flashing by hand before giving homeowners a straight answer. If you want the job done once and guaranteed in writing, call (682) 900-7902 and we’ll come look at what you’ve got.

FAQs