Boral Roofing Company Nationwide

Boral Roofing Company in Fort Worth: What to Know First

Boral roofing company work in Fort Worth typically means concrete or clay tile repair, underlayment replacement, or full tile reinstallation, and most jobs run $450 to $2,800 depending on what’s failed. We’re an independent Boral service provider, not a manufacturer-authorized dealer, which means we give you the straight answer on repair versus replace without a sales quota behind it. If you own a Boral roof anywhere in Fort Worth and something’s leaking, cracked, or sliding out of place, call (682) 900-7902 and we’ll walk the roof ourselves.

Call (682) 900-7902

This page is for homeowners in Fort Worth who have Boral tile on their roof and need a company that actually knows how that tile behaves in North Texas weather. No callbacks to a call center. No trainee with a tablet guessing at the problem. Just a straight read on what your roof is doing and what it needs.

How Boral Products Fail – and How We Fix Them

• Cracked Boral Concrete Tile from Hail or Foot Traffic: Boral concrete tile is dense, and when a Fort Worth hailstorm hits, the tile doesn’t just dent like asphalt shingles. It cracks from the underside out, and you often won’t see the damage until water starts staining the ceiling. We hand-inspect each tile in the affected slope, pull the cracked ones, and replace them with matching profile tile rather than slapping sealant over the break. Sealant over a cracked tile is a temporary patch, not a fix, and we’ll tell you that before we touch anything.
• Failed Underlayment Under Boral Tile: Here’s the one most homeowners don’t expect. Boral tile itself can last 50 years or longer, but the underlayment underneath it was never built for that timeline. On Fort Worth homes built in the 1990s and early 2000s, we regularly pull up tile and find the original felt underlayment has dried out, cracked, or turned to dust. The tile looks fine. The roof is not. We lift the tile, replace the underlayment with a modern synthetic product, and reset every tile we removed. What looks like a “broken tile” is often a failed roof system underneath it.
• Sliding or Slipped Boral Tile on Steeper Fort Worth Roofs: Homes in Tanglewood and the older neighborhoods around the Near Southside often have steeper roof pitches. Boral tile holds by weight and the fastening pattern, not just nails. When we see slipped tile at the eave line, the cause is usually a failed nail strip or a rotted batten, and the fix is not pushing the tile back up. It’s removing the affected runs, replacing the batten, and refastening every tile in that section so it can’t slide again.
• Broken Boral Ridge and Hip Tiles: The ridges and hips take the most wind on any tile roof, and Boral ridge pieces crack at the nail points more often than the field tile does. Fort Worth gets enough gusty days that we see this constantly. The problem isn’t just the cracked piece. It’s that water gets under the broken ridge and travels along the channel to the nearest seam. We replace the ridge or hip tile with a matching Boral profile and both sides of the flashing underneath it so the repair is watertight, not just cosmetically complete.
• Tile Around Flashings, Skylights, and Chimneys: Tile roofs fail at the transitions more than the open field. On Boral roofs in Fort Worth, the tile around chimneys and skylights gets lifted or broken because the flashing below it has failed first. We remove the surrounding tile carefully, inspect and replace the flashing, and reset the tile with the correct clearance. Most Boral leaks we find are at a flashing, and most of the time the tile itself was never the problem.

Our Boral Roofing Company Process

1. 1
   Call, and a live person answers. You call (682) 900-7902. No voicemail tree, no automated system. You tell us what the roof is doing. “Tell me what the roof is doing, we’ll figure out what it needs,” is how Travis Oakley, our owner, puts it on every call.
2. 2
   We walk the roof in person. A background-checked, uniformed technician comes out and walks the tile manually, checking decking, flashing, underlayment, and tile condition by hand. We don’t send a drone and guess from the driveway. We get on the roof.
3. 3
   We find the real cause, not just the symptom. Broken tile is usually the result of something else, like hail, failed underlayment, or a flashing that let go first. We diagnose the source and write the price down before any work starts. You’ll see the number on paper.
4. 4
   We make a parts decision and explain it. When we need to replace tile, we use matching Boral profile tile from our supply lines. If Boral tile in a specific color or profile is backordered (it happens more than you’d expect), we’ll tell you plainly and offer the best available match or a transparent timeline. No mystery delays.
5. 5
   We make the repair or replacement. The work is done with the correct fasteners, the correct underlayment, and the correct flashing so the tile roof functions as a system. We don’t shortcut and caulk cracks.
6. 6
   We test, clean, and put it in writing. We verify the repair with a water test where possible and clean the job site down to the last broken tile piece. Then we hand you the 365-Day Done Right Promise in writing: one full year, and if it fails, we come back for free.

What Boral Roofing Company Costs in Fort Worth

Here are the price ranges we see most often for Boral roof work in the Fort Worth market:

• Replacing 5-15 individual cracked or broken Boral tiles: $450 to $950
• Replacing failed underlayment in one valley or eave section: $800 to $1,800
• Full ridge and hip tile replacement on an average Fort Worth ranch: $1,500 to $2,800
• Chimney, skylight, or pipe flashing replacement with tile reset: $600 to $1,400
• Spot repairs with suspected hidden decking damage: $1,000 to $3,000 plus any discovered decking scope (written before we proceed)

What moves the price is whether decking has rotted underneath, how much of the underlayment has failed, and whether we can match the existing tile profile from available Boral stock. You won’t get a vague “depends” from us. You’ll get a number in writing before anything starts, and that number doesn’t move at the door. Call (682) 900-7902 to schedule your free estimate in Fort Worth.

Why Fort Worth Homeowners Call Brennan Roofing Co Fort Worth for Boral Work

Because we don’t send you a salesperson. We send you a roofing technician who knows tile systems from the decking up. Travis grew up in Los Angeles and learned the first roofing basics at Los Angeles Trade-Technical College before spending the better part of two decades working roofs across the Southwest. He and the crew have served Fort Worth neighborhoods like the Near Southside and runs near the Cultural District for years, and they treat Boral tile work the way it deserves: slowly and methodically.

Every Boral job is covered by the 365-Day Done Right Promise. One full year. In writing. If the repair fails within that period, we return and make it right at no charge. We also stock and install materials from GAF, Owens Corning, and CertainTeed, so if your system is better served by a different underlayment or a hybrid repair, we’ll tell you. You call a live person at (682) 900-7902 every time. No voicemail. No automated maze.

FAQs