Metal roofing
Architectural shingles
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Boral Shingle Repair: The Fort Worth Owner’s Guide
Boral shingle repair in Fort Worth typically costs $380 to $1,400 installed depending on the number of shingles, the profile, and whether the underlayment or flashing needs attention. Most single-course repairs run $380 to $650, and we stock Boral-compatible profiles on the truck so most jobs are done in one visit. The way Fort Worth homeowners usually find us is simple: a storm rolls through, a shingle cracks or tears loose, and they notice a piece of Boral in the yard or a bare spot on the slope from the street.
Boral is a concrete roof tile line, not an asphalt shingle, and that changes how repairs have to be approached. These tiles are heavier, more brittle, and far less forgiving to walk on than asphalt. We’ll get into that below because it matters for both the repair itself and for anyone thinking about grabbing a ladder.
Which Boral Models This Applies To
We repair Boral concrete roof tile across the profiles most common in Fort Worth: the flat and low-profile mission styles, the more rounded barrel profiles, and the flat shake-look tiles. Each profile has its own lock pattern, and here’s the compatibility gotcha: Boral tiles from different production runs can carry slightly different dimensions even within the same profile name. A tile that looks right at arm’s length may not seat correctly if it’s off by an eighth of an inch at the interlock. For that reason, we match by measuring the existing tile, not just by the name on the back.
Boral is now part of the Westlake Royal Building Products family, and the brand carries several series that have shown up on Fort Worth roofs over the years. The parts we commonly source are the field tiles themselves, matching hip and ridge caps, bird stop, and the flashing profiles that Boral tile roofs depend on. On the OEM question: for tile bodies, we always prefer genuine Boral or a same-spec aftermarket tile that matches the profile and color batch. For flashing and fasteners, quality aftermarket equivalents in a matching gauge work reliably and often cost less. What we won’t do is substitute a tile that “looks close” but doesn’t lock, because the first Fort Worth windstorm will find it.
If you still have spare tiles left by the original builder or installed in a garage rack, that helps. If not, we’ll source the profile. Either way, the written price comes before any work starts.
Styles & brands we work with






Signs Your Boral Shingle Repair Is Failing
- You find tile fragments in the yard or at the downspout outlet. Concrete tile doesn’t fail silently. A cracked or spalled tile sheds material, and runoff carries it down to grade. Fragments in one consistent spot usually point to a failed tile directly above.
- You can see a tile sitting proud or shifted out of line from the curb. When a fastening fails or the tile slips out of its interlock, it reads as a shadow or a raised edge in the field. That exposed gap is now a wind catch and a water path.
- Water staining appears on a ceiling or exterior wall after heavy rain. Often the tile itself is fine, but the flashing beneath it has rusted loose or the underlayment at a penetration has given way. Tile repairs that ignore flashing don’t fix the leak.
- You hear loose tile chatter during a windstorm. That’s a tile rocking against its neighbors. Every cycle of that movement wears the interlock and can crack the neighboring tiles.
- Black streaks or moss patch up on a shaded slope. Concrete tile holds moisture longer than most materials. On heavily shaded Fort Worth roof sections, trapped water breeds moss that lifts tile edges and accelerates freeze-thaw cracking in winter.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s the price picture for Boral shingle repair in Fort Worth, written plainly so you have a ballpark before anyone steps onto your property:
| Repair Scope | Installed Price Range |
|---|---|
| 1 – 3 cracked or shifted field tiles, roof accessible | $380 – $650 |
| 4 – 10 tiles including one hip/ridge piece | $650 – $1,100 |
| Tile replacement plus flashing repair at a penetration | $800 – $1,400 |
| Small section of underlayment replaced beneath tiles | $1,200 – $1,800 |
What drives the range is access and the condition of the material under the tile. A two-tile swap on a walkable single-story slope sits at the low end. A repair on a steep second-story Victorian with damaged decking under the tile sits at the high end. Every Brennan Roofing Co Fort Worth job includes the same thing: a background-checked uniformed technician, a written line-item price before any work starts, and the 365-Day Done Right Promise in writing. If the repair fails within that full year, we come back and make it right at no charge. No second invoice, no argument about whose fault it was.
DIY or Call Us?
Concrete tile is not asphalt shingle. It looks indestructible from the curb, but walk on it wrong and you will crack more tile than you came to fix. Tile roofs require knowing where to place your weight and how to lift tile without snapping the interlock. High roof work in Texas heat makes that worse, not better. If that’s not enough, the flashing detail is where most leak fixes are actually won or lost.
What an owner can safely do is document the problem: take photos from the ground, note where the tile is, and mark it from the interior if there’s a stain. If you have spare tiles stored in the garage or attic, that’s worth knowing too. Then call (682) 900-7902. Travis Oakley and our crew will walk the roof, identify exactly what failed and why, and put the price in your hand before anything comes off the roof. Tell me what the roof is doing – we’ll figure out what it needs.
FAQs
Boral concrete tiles commonly last 40 to 60 years in the Fort Worth climate, though the underlayment beneath them typically needs replacement every 20 to 30 years. We regularly see tile from the 1980s and 1990s still performing while its underlayment has long since failed. Call (682) 900-7902 if you want to know which layer is the problem on your roof.
In most cases, no. Cracked concrete tile loses its structural interlock and becomes a wind and water liability. The proper repair is removal and replacement with a matching profile. Call (682) 900-7902 for an honest assessment and a written price before any work starts.
A typical single-slope repair takes half a day from setup to cleanup, assuming the underlayment and flashing are still sound and we have the correct profile on the truck. If we need to source a specific color batch or profile, the repair may take a few extra days. Call (682) 900-7902 and we’ll tell you what’s involved after the inspection.
We stock common Boral-compatible flat and mission profiles on the truck for Fort Worth area calls, and we source specialty profiles and color batches through our supplier network. We also install materials from GAF, Owens Corning, and CertainTeed when those are the right match. Call (682) 900-7902 and we’ll confirm availability for your profile.
Written by Travis Oakley, Owner, Brennan Roofing Co Fort Worth at Brennan Roofing Co Fort Worth, serving Fort Worth and nearby areas.