Owens Corning
Architectural shingles
Metal roofing
Tile roofing
GAF
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Owens Corning Roofing Company in Fort Worth: What to Know First
We’re an independent Owens Corning roofing company serving Fort Worth, and most repair jobs are diagnosed and finished within one to three days of the first call. If you need a full replacement, you’re typically looking at two to five days on site depending on roof size, weather, and whether the decking underneath is still sound. We give you the price in writing before any work starts, so you know the number before a shingle comes off.
This page is for homeowners in Fort Worth whose Owens Corning roof is leaking, shedding granules, curling at the edges, or simply at the end of its service life. If that’s you, call (682) 900-7902 and we’ll walk the roof ourselves before we recommend anything.
How Owens Corning Products Fail and How We Fix Them
Owens Corning makes a solid shingle. We install them, we repair them, and we replace them. But every product has failure patterns, and in Fort Worth’s heat and hail cycles, some show up more than others. Here’s what we actually see on Owens Corning roofs around town:
- Duration and Oakridge series shingles losing granules after hail. Hail doesn’t always knock shingles off. More often it knocks the ceramic granules loose, leaving the asphalt mat exposed to North Texas UV. We see this on Duration and Oakridge roofs across Fort Worth neighborhoods after spring storms. The fix is a repair if the damage is isolated, or a full replacement if granule loss runs across multiple slopes. We don’t patch a roof that’s past saving, and we’ll tell you which one you have.
- Supreme 3-tab shingles cracking along the nail line. The Supreme line is an entry-level 3-tab, and after years of Fort Worth heat the shingle gets brittle. Cracks tend to run right through the fastener points. When we see this pattern, we know the shingle is cooked, not just damaged. Replacement is usually smarter than repair because the remaining shingles are in the same condition.
- Leaks at the valley junctions on older Owens Corning installs. A common failure point on Owens Corning roofs isn’t the shingle itself, it’s the valley flashing underneath. On Original Series and older Oakridge installs, the metal valley flashing can corrode or the underlayment at the valley can tear from thermal movement. We open the valley, replace the flashing and underlayment, then relay the shingles to match.
- Wind-driven rain getting past the drip edge on short overhangs. Some Fort Worth homes have tight overhangs, and we regularly see water wicking back under Owens Corning shingles at the eave when the drip edge was undersized or not lapped correctly. The shingle looks fine from the ground. The decking and fascia tell the truth. We refit the drip edge, replace any rotted sheathing, and reseat the starter course.
- Improper ventilation cooking the decking under Owens Corning shingles. This one isn’t Owens Corning’s fault, but it kills their shingles faster than anything else in Texas. A roof without balanced intake and exhaust ventilation runs hot, and heat from the attic side bakes the shingle from below. We flag it on every Owens Corning inspection. If the decking is failing, we fix the ventilation before we put the new shingles on. Otherwise the new roof dies young.
Styles & brands we work with






Our Owens Corning Roofing Company Process
Every Owens Corning job we run in Fort Worth follows the same steps. No shortcuts, no surprises. Here’s how it goes:
- 1
You call, a person answers. No voicemail tree. We take your information and schedule a time to walk the roof.
- 2
We inspect it ourselves. Travis Oakley or one of our technicians gets on the roof and checks the shingles, flashing, decking, underlayment, and drip edge by hand. We don’t do drive-by estimates.
- 3
You get a written price. Before any work begins, the number is on paper. It doesn’t move at the door.
- 4
We decide on parts together. For Owens Corning roofs, we use OEM Owens Corning materials when the warranty and the repair call for it, and we’ll tell you plainly when a quality aftermarket flashing or underlayment does the same job for less. You make the call with real information.
- 5
The repair or replacement gets done. Technicians are background-checked and uniformed. The site stays clean. Nails get picked up with magnets, not promises.
- 6
We test and we guarantee it. We run water over the repaired area when it’s safe to do so, then hand you the 365-Day Done Right Promise in writing. If it fails within a year, we come back for free.
See the difference
Before
After
Before
After
Before
AfterWhat Owens Corning Roofing Company Costs in Fort Worth
Here’s what you should expect to pay for Owens Corning roofing work in Fort Worth, based on the jobs we’ve done across the area:
- Minor shingle repair (a few missing or cracked shingles): $350 to $700
- Valley or flashing repair: $500 to $1,100 depending on length and decking condition
- Chimney or vent boot resealing: $250 to $500
- Full Owens Corning reroof on a typical single-story Fort Worth home: $9,500 to $16,000 depending on size, pitch, tear-off, and decking replacement
- Decking replacement (per sheet, if rot is found): $75 to $110 per 4×8 sheet
What moves the price most is decking condition. If the sheathing under the shingles is rotted or delaminated, you pay to replace it. That’s honest money, and we show you the decking before we replace it. Call (682) 900-7902 for a free estimate with the price in writing.
Why Fort Worth Homeowners Call Brennan Roofing Co Fort Worth for Owens Corning Work
Because we run a disciplined job. Every technician who steps onto your Fort Worth roof is background-checked and in uniform. The price is written before any work starts, and it doesn’t change at the door. The 365-Day Done Right Promise covers every repair and installation for one full year, in writing, with a free return visit if it fails. We install Owens Corning, but we also work with GAF and CertainTeed, so we’re not going to push you into a brand that doesn’t fit your house. The Garrison Standard isn’t a marketing line, it’s how we run every job: written price, disciplined crew, a clean site, and a guarantee we’re willing to stand behind.
FAQs
It can, if the repair is done wrong. Using non-Owens Corning sealants or fasteners in a way that manufacturer wouldn’t approve can void coverage on some Duration and Oakridge series warranties. We use Owens Corning materials where the warranty requires them and tell you when an aftermarket part won’t affect coverage.
Most leaks are diagnosed on the first visit and repaired within one to three days. If it’s a widespread issue or the decking is compromised, the repair gets scheduled as a replacement. Call (682) 900-7902 to get on the schedule.
Repair makes sense when the damage is localized to a few shingles, a single valley, or one flashing point. Replacement is the honest call when granule loss runs across multiple slopes, the shingles are cracking along nail lines, or the decking is failing. We’ll tell you which one you have after walking the roof.
Yes. Duration and Oakridge shingles are stocked throughout the Dallas/Fort Worth metro, so we’re not waiting on freight for most repairs. Specialty colors or discontinued series like some Supreme and Oakridge colorways can take an extra few days, and we’ll give you that timeline straight.
We serve Fort Worth proper and the surrounding areas, including jobs in neighborhoods like the Near Southside and commercial work near the Cultural District. Call (682) 900-7902 and we’ll let you know if your address is in our service area.
Tell me what the roof is doing, we’ll figure out what it needs.
Written by Travis Oakley, Owner, Brennan Roofing Co Fort Worth at Brennan Roofing Co Fort Worth, serving Fort Worth and nearby areas.