A Brennan company - serving Fort Worth, TX

CertainTeed Gutter Replacement Nationwide

Metal roofingMetal roofing
Architectural shinglesArchitectural shingles
Tile roofingTile roofing
GAFGAF
Owens CorningOwens Corning
Flat & low-slopeFlat & low-slope
Every visit starts with

Free roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation

Your new roof for as low as$159/month*On approved credit; ask for current terms
Get your free estimate

CertainTeed Gutter Replacement: The Fort Worth Owner’s Guide

We stock and install CertainTeed-compatible gutter replacement parts across Fort Worth, with most residential swaps running $380 to $740 installed depending on run length, profile, and how much of the existing hanger system can be reused. We carry the common colors and profiles on our trucks, so a single-visit replacement is typical for standard 5-inch K-style runs. Most Fort Worth homeowners discover the problem the hard way: a gutter pulling away from the fascia after a spring storm, a visible split at a seam, or water pouring over the edge in one spot while the rest of the run drains fine.

Call (682) 900-7902

This page covers exactly what fails on CertainTeed gutter systems, what the replacement involves, and what it costs in Fort Worth. We’re an independent roofing and exterior contractor, not affiliated with CertainTeed. But we install their gutter products regularly and know the line well enough to tell you what matters and what doesn’t.

Which CertainTeed Models This Applies To

Most CertainTeed gutter replacement work we do involves their standard 5-inch K-style aluminum profiles, though we also handle 6-inch commercial runs and half-round sections on older Fort Worth homes, particularly in Fairmount and Arlington Heights where the housing stock leans historic. The part itself is rarely complicated. What matters is matching the profile geometry, the gauge, and the finish so the new section seats cleanly against the existing run.

The compatibility gotcha we see most often: CertainTeed’s Hidden Hanger system uses a specific hanger pitch that doesn’t always accept generic aftermarket hangers cleanly. If the hangers are still in good shape, we reuse them and match only the gutter section itself. If the hangers are failing too, we replace with an equivalent that seats properly rather than forcing something close-enough. For color matching, CertainTeed’s finish codes matter in Fort Worth. Texas sun fades aluminum unevenly, and a fresh section that’s two shades off will stand out for years. We verify the finish code and account for sun exposure before ordering anything.

Explore

Styles & brands we work with

Architectural shingles
Architectural shingles
Metal roofing
Metal roofing
Tile roofing
Tile roofing
GAF
GAF
Owens Corning
Owens Corning
Flat & low-slope
Flat & low-slope

Signs Your CertainTeed Gutter Replacement Is Failing

  • Pulling away from the fascia. The hangers or screws have worked loose through years of expansion and contraction. Fort Worth’s summer heat cycles are brutal on aluminum, and a gutter that’s pulled even half an inch lets water run behind it and into the soffit.
  • A visible split or crack at a seam. CertainTeed sections are seam-sealed at joints. Once the sealant fails, freeze-thaw cycles from those February ice storms open the seam further every winter. This is the most common replacement trigger we see.
  • Water pouring over the edge in one concentrated spot. That usually means a low spot has developed from a bent hanger or a slipped end cap. The gutter itself may be fine structurally, but the section needs to be reset or replaced if the channel is deformed.
  • Rust staining or pinhole leaks on the underside. Steel hangers or screws that weren’t mismatched to the aluminum can corrode and eat through from the back. By the time you see staining on the outside, the underside is already compromised.
  • Sagging between hangers. Aluminum loses rigidity over decades, especially on long Fort Worth runs with few downspouts. A section that visibly bows when it rains is near the end of its service life.

Replacement Cost & What’s Included

In Fort Worth, a standard CertainTeed-compatible 5-inch aluminum gutter replacement on a typical single-story run runs $380 to $740 installed. That includes removal of the failed section, disposal, new matching gutter, seam sealing, hanger replacement where needed, and a visual check of the downspout connection. Two-story work adds $80 to $150 for ladder setup and safety equipment on most homes.

What moves the price: run length, profile type, color match difficulty, and whether the fascia board behind the gutter has rot that needs repair before anything gets reinstalled. We write the price down before any work starts, and it does not move at the door. No add-ons, no “while we’re up there” surprises. That’s the Garrison Standard we operate under. Every gutter replacement we install carries the 365-Day Done Right Promise in writing: if it fails within a year, we come back and fix it at no charge.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

DIY or Call Us?

Gutter replacement is not a high-tension job like garage springs, and the safety risks are mostly ladder-related. What you can safely check yourself: whether the section is simply loose at a hanger, whether an end cap has slipped, or whether debris is backing water up. A Phillips screwdriver and a ladder on level ground will answer those questions.

Where DIY goes wrong: matching the profile so the new section seats against the old one without a lip that catches debris, getting the slope right so water actually moves toward the downspout, and color matching that doesn’t look like a patch job. We’ve also fixed enough homeowner attempts where the fascia got stripped out from reused screw holes to know it’s an easy job to get 90% right and a hard one to get truly sealed. If the section is cracked, split, or sagging, the fix is replacement, not another layer of caulk. Tell me what the roof is doing – we’ll figure out what it needs. Call (682) 900-7902 and we’ll come look.

FAQs

Get a Written Price Before Any Work Starts

If your CertainTeed gutters are failing, the first step is a straight answer about what’s actually wrong and what it costs to fix. We’ll walk the roofline, check the section by hand, and put a number on paper before anything gets ordered or removed. That’s how Travis Oakley and the crew at Brennan Roofing Co Fort Worth work on every job, from a single gutter section to a full roof replacement.

Call (682) 900-7902 to schedule a free estimate. A live person answers, day or night. No voicemail, no callback queue, no automated system. Just a straight answer about your gutters.

Written by Travis Oakley, Owner, Brennan Roofing Co Fort Worth at Brennan Roofing Co Fort Worth, serving Fort Worth and nearby areas.

Need Roofing help in Fort Worth? Licensed & insured · Written quotes before work starts response · free estimates
Call (682) 900-7902
Local Service Coverage

Request a Free Estimate in Fort Worth

Tell us what you need - Brennan Roofing Co Fort Worth responds fast. No obligation.

When you send us your details, you agree to the terms of our Privacy Policy and consent to being contacted by call, text, or email regarding your project, including by the service partners who may complete the work.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch