Metal roofing
Architectural shingles
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Styles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Gutter Installation Cost in Fort Worth?
Gutter installation in Fort Worth typically runs between $1,850 and $4,200 for a standard single-family home, with most homeowners paying around $2,900 for seamless aluminum gutters on a 1,800 to 2,200 square foot house. Seamless aluminum runs $9 to $16 per linear foot installed, while sectional vinyl gutters come in lower at $5 to $9 per linear foot. A full replacement with premium copper runs $22 to $38 per linear foot. The final number depends on roofline footage, gutter material, fascia condition, and whether you’re replacing old gutters or starting fresh.
We’re home to a lot of Fort Worth roofing work, and gutters are part of nearly every full roof replacement we do. If you want an exact number for your house, we’ll put it in writing before any work starts. Call (682) 900-7902 and we’ll measure your roofline, check your fascia boards, and hand you a price that doesn’t move.
Gutter Installation Cost Breakdown (2026)
Here’s what gutters actually cost in Fort Worth right now, broken down by material and project scope. These numbers reflect what we’re seeing across Tarrant County in 2026, not national averages that may not match our market.
| Gutter Type | Cost per Linear Foot | Typical 1,500 – 2,000 Sq Ft Home (160 – 220 linear feet) |
|---|---|---|
| Seamless Aluminum | $9 – $16 | $1,850 – $3,300 |
| Sectional Vinyl | $5 – $9 | $900 – $1,800 |
| Seamless Galvanized Steel | $11 – $18 | $2,200 – $3,750 |
| Seamless Copper | $22 – $38 | $4,100 – $7,900 |
| Half-Round Aluminum | $12 – $20 | $2,400 – $4,100 |
Those ranges include materials, labor, downspouts, hangers, and standard end caps. What they don’t include is what makes or breaks a gutter job in Fort Worth specifically: fascia repair, leaf protection, and the condition of your existing roofline. We’ll get into those below.
What’s Included in a Gutter Estimate
When we write a gutter estimate at Brennan Roofing, it’s a line-by-line document. You’ll see the gutter material, the gauge, the downspout count, the hanger type, and any fascia or soffit work separated out. The price on that paper is the price you pay. It doesn’t move at the door. That’s The Garrison Standard, and it applies to a 40-foot gutter run the same way it applies to a full roof replacement.
Here’s what a standard seamless aluminum installation includes:
- Continuous gutter runs – machine-formed on site to your roofline’s exact measurements, so there are no seams to leak at the joints.
- Downspouts – typically one downspout per 30 to 40 linear feet of gutter, sized to handle Fort Worth’s heavy spring downpours.
- Hangers and brackets – hidden hangers screwed into the fascia, not the old spike-and-ferrule method that works loose over time.
- End caps and miters – sealed at every corner and termination point.
- Debris screening at downspout openings – keeps leaves from clogging the outlet, which matters when you’ve got live oaks or pecans overhead.
- Removal and haul-off – we take the old gutters with us. You shouldn’t find a pile of aluminum in your alley on Monday.
What’s NOT Included (and What You Should Ask About)
Three things routinely get left off low gutter bids in Fort Worth, and they’re exactly the things you’ll end up paying for later:
- Fascia board replacement – if your fascia is rotted (common on older homes in Wedgwood, Ridglea Hills, and the Mistletoe Heights area), gutters can’t be properly anchored. Replacing fascia runs $6 to $10 per linear foot and should be itemized.
- Leaf guards or gutter covers – expect $4 to $9 per linear foot added to the job. For houses under heavy tree canopy in places like Arlington Heights or Tanglewood, these pay for themselves within a couple of seasons.
- Downspout extensions – the little kick-out or buried extension that carries water away from the foundation. Cheap insurance against foundation movement, which Fort Worth’s clay soil is notorious for.
What Affects Gutter Installation Pricing in Fort Worth
Gutter pricing doesn’t vary much by region of the country, but it does vary by house and by what’s growing around it. Fort Worth has some specific conditions worth knowing about before you sign a bid.
- Roofline footage and story count – gutters are priced per linear foot, but second-story work adds labor. A two-story colonial in Ryan Place costs more per foot than a single-story ranch in Western Hills, because the crew is on ladders at height longer and setup takes more time. Steep roof pitches add to that.
- Foundation protection needs – Fort Worth sits on expansive clay soil (the Eagle Ford and Woodbine formations), which swells and contracts with moisture. Gutter capacity and downspout placement matter more here than in, say, sandy-soiled Florida. You may need 6-inch gutters instead of standard 5-inch, which runs about $1.50 to $2.50 more per linear foot, but moves roughly 40% more water.
- Tree cover – Live oaks, pecans, and cedar elms drop a lot of organic material. Homes in Canwick, Berkeley Place, or anywhere with mature tree canopy over the roofline should budget for leaf protection up front rather than recurring gutter cleanings. Pine needles in the Benbrook area are especially hard on clogged downspouts.
- Fascia and soffit condition – homes built before about 1985 in Fort Worth often have 1×6 wood fascia that’s been baking in Texas sun for four decades. If boards are soft or split, anchors won’t hold. This is the single most common upcharge on gutter jobs we take over from another bidder.
- Gutter material and profile – K-style aluminum is the workhorse in Fort Worth and what we recommend for most homes. Half-round looks right on older bungalow and craftsman styles in Fairmount and Southside, but it costs more because it holds less water per inch and usually requires additional hangers. Copper is a premium look that will outlast the house, but the price reflects it.
- Seamless vs. sectional – sectional vinyl is the cheapest option and you’ll see it on rental properties and flips. It works, but the seams are failure points, and vinyl gets brittle in Texas sun within five or six years. Seamless aluminum is the standard on homes where people plan to stay.
- Permit requirements – the City of Fort Worth doesn’t require a separate permit for gutter installation on a single-family home, but if the gutter work is part of a larger roof or exterior remodel that includes structural changes, a permit may be pulled as part of that job. It’s a small line item when it applies, and it’s already in our numbers.
Gutter Materials: What Fort Worth Homeowners Actually Choose
We install a range of materials, and we’ll explain the tradeoffs honestly. Here’s what we tell friends and neighbors when they ask what to put on their house.
Seamless Aluminum (Most Common)
This is what goes on about 80% of the houses we do in Fort Worth. It’s formed on site from coil stock, so each run is one continuous piece custom-cut to your roofline. Aluminum holds up well in North Texas heat, doesn’t rust, and comes in a wide range of factory colors. Expect 20 to 30 years of service if it’s properly pitched and the hangers are installed correctly. $9 – $16 per linear foot installed.
Sectional Vinyl (Budget Option)
You’ll see these at home centers in 10-foot sections that snap together. They’re cheap and easy to install, which means they’re also easy to install incorrectly. UV exposure makes vinyl brittle, and the seams leak over time. For a shed, a carport, or a short-term rental situation, vinyl can work. For a house you own and plan to keep, spend the money on seamless. $5 – $9 per linear foot installed.
Galvanized Steel (Durable, But Watch the Seams)
Steel gutters take a beating and can handle heavy snow loads, which is less of a concern here than in the Panhandle. The downside: steel rusts if the galvanized coating gets scratched, and any cut ends need to be sealed properly. We recommend painted steel over unpainted. $11 – $18 per linear foot installed.
Copper (Premium, Long-Term)
Copper gutters don’t rust, don’t need paint, and develop a patina that turns a dull brown-green over the decades. On a historic home in Southside or a high-end build in the River District, copper is the right call. It’s also the single most expensive gutter material, and installation is specialized work. $22 – $38 per linear foot installed.
Gutter Sizing: 5-Inch vs. 6-Inch in Fort Worth
Most homes get 5-inch K-style aluminum gutters, which handle about 5.5 gallons of water per minute per downspout. Fort Worth’s average rainfall is around 36 inches a year, but spring storms can drop 4 to 6 inches in a single afternoon. A 5-inch gutter handles that fine if the pitch is right and you have enough downspouts. But if your roof has a lot of concentrated drainage points, or your house sits on a slope where runoff funnels, 6-inch gutters may be the better choice. They add roughly $1.50 to $2.50 per linear foot to the job and give you headroom for heavier downpours.
The other reason to consider 6-inch: oak leaves and pine needles clog a 5-inch gutter’s outlet faster. A bigger gutter moves debris through more easily, which means fewer climbs up the ladder for you.
Gutter Installation vs. Repair: Which Do You Need?
Before you budget for full replacement, a gutter repair might solve the problem for a lot less. Repairs in Fort Worth typically run:
- Re-securing loose gutters: $120 – $350
- Replacing a downspout: $90 – $220 per downspout
- Sealing leaking seams or corner joints: $100 – $300
- Resloping or repitching a sagging run: $150 – $450
If your gutters are under 10 years old and the problem is isolated, repair is usually the financially smart move. If the aluminum is separating at the seams, the hangers are pulling out of the fascia, or you’ve got rust eating through the bottom, replacement may be cheaper in the long run than chasing repairs every year.
We’ll tell you which one you need when we look at the house. We don’t sell replacement when repair does the job. The price goes in writing either way.
How to Save on Gutter Installation
Gutters aren’t the place to cut corners, but there are legitimate ways to keep the cost down without sacrificing quality:
- Get gutters done at the same time as a roof replacement – if you’re already getting a new roof, combining the gutter job can save on setup and mobilization costs. Our full gutter installation in Fort Worth service handles these combined jobs regularly.
- Replace only what’s failing – if half your gutters are fine and half are shot, a good crew can replace sections and match the existing profile and color closely. It’s not always a perfect match after years of sun fade, but it’s a fraction of full replacement cost.
- Choose standard colors – white, off-white, and bronze aluminum coil stock are manufactured in higher volume and cost less than custom or specialty colors. The difference is usually $0.50 to $1.50 per foot.
- Keep your trees trimmed – less debris in the gutter means less water backing up, which means less damage to fascia and hangers over time. The cheapest gutter maintenance is a saw.
- Ask for adjustments rather than a full reslope – sometimes a gutter that’s overflowing has one point with insufficient pitch, not an entire failing run. A honest crew will adjust a section for a couple hundred dollars instead of selling you a full replacement.
We give free estimates, and the number on that estimate is the number you’ll pay. If you want to talk through options, call (682) 900-7902. We’ll come out, measure, and tell you what you actually need in about an hour.
Why Choose Brennan Roofing for Gutter Installation
We’re an independently owned business in Fort Worth, part of the Garrison Partners family, which has roots back to 2000. We operate under The Garrison Standard, which sounds like marketing-speak, so let’s be specific about what it means:
- Written price before any work starts – no exceptions, ever. The price goes on paper, you read it, you sign it. That’s the price.
- 365-Day Done Right Promise – every gutter installation is guaranteed in writing for one full year. If something isn’t right, we come back and make it right at no charge. Free second visit if an installation fails within that guarantee period.
- Background-checked, uniformed technicians – the person on your ladder is someone we’ve vetted, and they show up in a Brennan uniform. You know who’s on your roof.
- Live person on the phone, 24/7 – you call, a person answers. No voicemail, no callback queue, no automated system. Storm season in North Texas does not wait.
- Real materials from real manufacturers – we install gutters and roofing materials from lines like GAF, CertainTeed, Owens Corning, IKO, Atlas, Tamko, and Boral. We’ll explain the differences and let you decide.
Travis Oakley runs the Fort Worth operation. When you call for an estimate, you’re talking to someone who has his name on the business and votes in the same county elections you do.
How the Gutter Installation Process Works
You’ll know what’s happening at every step, because we write it down before we touch anything:
- Call or contact us – a live person schedules your free estimate. No call center, no automated phone tree.
- We measure and inspect – roofline footage, fascia condition, downspout placement, drainage patterns. About an hour at your house.
- You get a written price – line items, material specs, gutter gauge, color, downspout count. The number doesn’t change.
- We schedule the work – most gutter installations are done in a single day. Two-story homes with complex rooflines may take two.
- Installation day – the crew shows up inside the scheduled window, in uniform. Gutters are formed on site, hung, sealed, and tested with water.
- We walk the job with you – you see the work before we pack up. Any issues get fixed before the crew leaves.
- Warranty in writing – the 365-Day Done Right Promise is handed to you on paper. It’s not a verbal promise.
FAQs – Gutter Installation Cost in Fort Worth
How much does gutter installation cost per foot in Fort Worth?
Seamless aluminum gutters run $9 to $16 per linear foot installed in Fort Worth, which includes materials, labor, hangers, downspouts, and haul-off. Sectional vinyl runs $5 to $9 per foot, while copper runs $22 to $38 per foot. For an exact price on your house, call (682) 900-7902 – estimates are free.
How much does it cost to put gutters on a house in Fort Worth?
A full gutter installation on a typical 1,500 to 2,000 square foot Fort Worth home costs between $1,850 and $3,300 for seamless aluminum. Larger homes with 2,800+ square feet of living space and complex rooflines run $3,800 to $5,500. The biggest variables are roofline footage, story count, and whether fascia boards need replacing.
Is it cheaper to replace gutters or keep repairing them?
If your gutters are under 10 years old and the problem is isolated, a $120 to $350 repair makes more sense. If you’re paying for multiple repairs per year, or the aluminum is separating at the seams and the hangers are pulling out of the fascia, full replacement at $1,850 to $3,300 typically costs less than three years of repeated patchwork. We’ll tell you which one applies to your house when we inspect it.
Do I need 5-inch or 6-inch gutters in Fort Worth?
Most Fort Worth homes do fine with 5-inch seamless aluminum gutters. Six-inch gutters cost $1.50 to $2.50 more per foot and make sense for homes with large roof surfaces, concentrated drainage points, or heavy tree cover from live oaks and pecans. The extra width moves about 40% more water during the intense spring storms we get in Tarrant County.
How long do gutters last in Fort Worth?
Seamless aluminum gutters in Fort Worth typically last 20 to 30 years if properly installed and maintained. The Texas sun eventually breaks down the factory finish, and hangers can work loose over decades of thermal expansion. Vinyl gutters last 5 to 10 years before UV exposure makes them brittle. Copper lasts 50+ years and doesn’t need paint.
What guarantees should a Fort Worth gutter installer offer?
At minimum, a gutter installer should offer a written workmanship guarantee. Brennan Roofing provides the 365-Day Done Right Promise: every installation is guaranteed in writing for one full year, and we return at no charge if anything fails within that period. Material warranties from the manufacturer cover defects in the product itself.
Pricing reflects the Fort Worth market as of 2026. Brennan Roofing Co Fort Worth offers free estimates – call (682) 900-7902.
Written by Travis Oakley, Owner at Brennan Roofing Co Fort Worth.
What Our Customers Say
"Neat, quiet, and disciplined crew. Magnet swept the yard after."
- Tonya R."They gave me a warranty in writing and stood behind it."
- Irene G."Replaced a rotted fascia board along with the roof edge. Matches the trim."
- Lou H.